JXmodel 1/14 Tamiya Engineering Machinery remote control hydraulic truck mounted crane JX-PK40002EH-3/5

Save 5%
$2,261.29 $2,380.30
JX-SCD03、JX-SCD05
10 Items
model
Version
Quantity

Buyer's Note:I can help you avoid expensive extra fees and taxes, please contact me. If possible, you can contact your country's customs about these extra fees before purchasing.

Brand:JXModel

Model:JX-SCD03、JX-SCD05

PK40002-EH truck-mounted crane

Welcome to buy PK40002-EH Truck Mounted Crane from JXModel. For better utilization of this product, please be sure to read this description carefully to avoid unnecessary losses.

Product Description.

1. 

1/14 remote control heavy duty truck crane model.For 1/14 Tamiya tractor truck scale.Tamiya tractor truck trim and military truck crane model trim.

2.  

  1 set of main frames and 5 main frame cylinders; 

  4 telescopic legs, 4 telescopic leg cylinders;

  4 support legs, 4 support leg reduction motors with 2 ESCs;

  A 4-way reversing valve, equipped with 4 9g servos ;and 

  1 set of turntable and turntable motor with ESC;

  1 set of high flow and high pressure oil pumps plus ESC;

  One fuel tank of 82mm*52mm*52mm ;and 

  1 set of simulated beam and 2 pieces of boom positioning plates (for replicating the required hole positions of the product);

  Complete with 1 meter high pressure fuel hose, 1 meter flexible fuel hose and 2 fuel hose clamps;

  An instruction manual for the product.

3. Lifting power. Hydraulic (test lifting 3KG, the reason why the third section of the telescopic arm extends the length of the lifting force is different, understand the real car also know. Suggest not lifting heavy objects, after all, is a model, the pursuit of

(The action, can be lifted simulation of heavy objects)

4. Telescopic leg power: hydraulic

5. Vertical support leg power: N20 reduction motor plus screw rod

Product Specifications.

1.Fold size:170*200*200 mm (installation reserved space is not less than 170mm)

2. Fully extended dimensions of the product: the length of the third telescopic arm is 650mm; the height of the second arm is 350mm; the lifting height is 834mm (measured from the ground)

3. Rotation angle (left/right) 360 degrees, it is recommended that less than 360 degrees

4. Product weight: 5.5KG

5. Power supply: 2S-3S lithium battery (recommended 3S)

6. Product control channel required: 8 pass (recommended players less than 12 channels above the ballad control)

7. Hydraulic oil: new ordinary national standard No. 46 hydraulic oil (can not use too thick)

Specific References

Write your review

JXmodel 1/14 Tamiya Engineering Machinery remote control hydraulic truck mounted crane JX-PK40002EH-3/5

Write your review

16 other products in the same category:

Best Sellers